Toronto · Ontario · Shipping Canada-wide
QUOTES RETURNED IN ≤ 24 HRS · (647) 360-7079
Home/Service Areas/Halton Hills

Industrial mezzanines & steel stairs in Halton Hills.

Span Line engineers, fabricates, and installs structural mezzanines, work platforms, rooftop crossovers, and code-compliant steel stairs across Halton Hills — Georgetown, Acton, and the employment lands along the 401 corridor.

CWB W47.1 certified OBC 2024 P.Eng. stamped in-house Install across the GTA
rooftop-platform-install.jpg 800 × 600 Galvanized non-penetrating rooftop crossover platform and stairs instal…

In short: We're an Ontario steel fabricator building mezzanines, platforms, and stairs for Halton Hills businesses and institutions, stamped to OBC 2024 and welded to CWB W47.1. The shop is about 45 minutes from Georgetown via the 401 and Trafalgar Road, so site measures and installs schedule quickly across the Town.

  • From our shop to Georgetown~45 min via 401 & Trafalgar Rd
  • Typical mezzanine lead time4 – 8 weeks from sign-off
  • Typical stair lead time3 – 6 weeks from sign-off
  • DrawingsP.Eng.-stamped to OBC 2024, in-house

Two older town cores, and new employment lands.

Halton Hills is really two industrial pictures at once. Georgetown and Acton have established employment areas built up over decades — older buildings, tighter column grids, modest clear heights, and slabs poured for a different era of use. That is the profile where a mezzanine has to be engineered around what is already there rather than dropped into open space, and where the slab check under the columns genuinely matters.

To the south, the Premier Gateway employment lands along the 401 corridor are a different proposition — newer, taller buildings where high clear heights reward multi-tier decks and deep storage mezzanines. We work in both, and the design conversation is not the same in each.

Halton Hills also has a substantial base of municipal, institutional, and school-board buildings — arenas, works yards, community centres, and schools. On those the recurring job is rooftop access and mechanical servicing, usually on a roof with an active membrane warranty. That is why most of our institutional work here is specified as a fully weighted, non-penetrating system.

Measure, stamp, build, install.

  1. 01

    Site measure

    A ~30-minute visit to capture clear heights, column grid, and slab capacity — and on rooftop scopes, the membrane type, the level changes, and who holds the roof warranty.

  2. 02

    Stamped drawings

    Engineered and P.Eng.-stamped to OBC 2024 in-house — the set the Town of Halton Hills Building Division needs for the permit.

  3. 03

    In-house fabrication

    Cut, welded, and finished at our shop to CWB W47.1 — not white-labelled out. Galvanizing or shop primer as the environment calls for.

  4. 04

    Install on your window

    Sequenced into your operation or your shutdown and installed by our own crew across Georgetown, Acton, and the 401 employment lands.

See the full engineering & install process for how each stage is controlled.

// Who builds it

Span Line Systems is the industrial mezzanine and stair division of Art Metal Canada. Drawings are stamped by a PEO-licensed P.Eng. on staff; welding is done to CWB W47.1 and CSA W59 by our own certified fabricators. We don't white-label the fabrication or subcontract it out — the shop that draws it builds it.

  • WeldingCWB W47.1 · CSA W59
  • Structural codeOBC 2024 · NBCC §4.1.5
  • EngineeringPEO-licensed P.Eng., stamped in-house
  • ParentArt Metal Canada

Straight answers.

Which Halton Hills areas do you cover?
The whole Town — the Georgetown and Acton employment areas, the rural business properties between them, and the Premier Gateway employment lands along the 401 corridor.
Do you work on municipal and institutional buildings in Halton Hills?
Yes. Arenas, works yards, community centres, and school-board buildings are a regular part of our work. These projects usually need a single point of responsibility across design, fabrication, and install, and they frequently involve an active roof warranty — which is why we design rooftop platforms and crossovers as fully weighted, non-penetrating systems by default.
Can you build rooftop platforms without penetrating the roof?
Yes — that is our standard approach on any building with a live membrane warranty. The system is held by engineered ballast on membrane-compatible bearing pads, sized against wind uplift with a safety factor, so nothing passes through the roof assembly. We confirm the pad detail with the warranty holder before anything is fabricated.
How fast can you reach a Georgetown site?
Usually within a few business days. The shop is roughly 45 minutes away via the 401 and Trafalgar Road, so measures and installs schedule without difficulty.

We cover Halton and the west GTA — Milton, Brampton, Caledon, Oakville, Burlington — and ship province-wide. See the full service-area map or tell us the span.

Tell us the span. We'll send numbers back within 24 hours.

Quick quote form or a direct call — whatever fits. Ontario warehouses only; we handle delivery Canada-wide.